PDA

View Full Version : Wig Wag Installation?

jpargo
05-06-2009, 03:41 PM
Guys, can anyone help me out with installing the Wig Wags on my SSP? It looks like there are pigtails coming out of each of the front headlights. I was wondering if anyone had some direction as I would like to get them installed and done correctly to what Santa Clara might have done. There are three switches in the car already...any help is greatly appreciated. Thanks in advance...John;)
ImEvil1
05-06-2009, 07:20 PM
What brand is your flasher?
jpargo
05-07-2009, 09:40 AM
Mike, plesae bear with me as this is new to me. Unitrol Model #480K if that is the correct part.
ImEvil1
05-07-2009, 12:48 PM
No prob.

I believe that the Unitrol 480k is a siren/switch combo. You need a separate headlight flasher (if you don't already have one).
jpargo
05-10-2009, 10:51 AM
Any suggestions as to what one Santa Clara used? I would like to get these hooked up...
ImEvil1
05-10-2009, 12:07 PM
I don't know specifically what they ran for a flasher. Jim Y. might know, since he made a contact out there. You could always use an old Unitrol (like the ones that Daniel just sold on here), since it matches up wth the other equipment. Any brand will work, you just have to be careful to look at the flash rate and don't get anything too new (if that stuff matters to you).

Also, you could always get something like this:
http://cgi.ebay.com/lightbar-accessory-Sho-Me-Headlight-Flasher_W0QQitemZ250419352161QQihZ015QQcategoryZ67 225QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://i4.ebayimg.com/03/i/001/1a/a7/9a77_1.JPG

And mount it in the glove box with the rest of the equipment. Personally, though, if you are using a switchbox, I'd go with something that mounts underhood:

http://cgi.ebay.com/ebaymotors/SOUND-OFF-ROAD-RUNNER-HEADLIGHT-FLASHER_W0QQcmdZViewItemQQcategoryZ42613QQihZ006QQ itemZ160333194574QQrdZ1QQsspagenameZWDVW

http://i24.ebayimg.com/05/i/000/e4/96/a61c_2.JPG

You should be able to get a working flasher off of eBay for $10-$20.
SSPGARY
05-17-2009, 04:41 PM
Guys, can anyone help me out with installing the Wig Wags on my SSP? It looks like there are pigtails coming out of each of the front headlights. I was wondering if anyone had some direction as I would like to get them installed and done correctly to what Santa Clara might have done. There are three switches in the car already...any help is greatly appreciated. Thanks in advance...John;)

Out of curiosity, what are those pigtails for? I'm assuming they're for fog lights on the GT model?