Pac Rt location

[FHP813]

Just got my Pac-Rt Today. Do we know how this was mounted in the FHP cars? What position in the trunk, not the way it was fastened.:D

[ImEvil1]

Bernie,

I don't have any in-service trunk pics, but I do have two sets of holes in my car. I can take a look and see if the holes match up with the Micor and PAC I have, but I think that these were just mounted directly to the trunk floor.

[FHP813]

OK I'll check mine. I think I'm going to remove the trunk mat for the shows instead of drilling through the mat. BTW the micor key fits the PAC.:thumbsup:

[CHP 3705]

I've got a Micor in my 88 FHP and the holes in the floor lined up perfectly with the Micor tray. On mine the holes were drilled through the trunk mat also. Mine was mounted on the passenger side of the trunk at an angle. Doug

[ImEvil1]

Doug,

Glad to hear about the Micor in your car...any holes for the repeater back there? My original carpet doesn't have the holes in it, so I'm going with Bernie's route. :)




Bernie,

Good deal on the key thing...learned something new.:takenotes:

[FHP813]

Bernie,

Good deal on the key thing...learned something new.:takenotes:

Lucky for me cause it was locked...

[w4ata]

A lot of the pac-rt units were mounted on top of the micors and the 2135 motorola key fits just about all motorola units with the exception of some of the base and repeater cabinets. I'm not sure if it will fit the spectras or not but I'll check.
Bud

[CHP 3705]

[QUOTE=ImEvil1;1822]Doug,

Glad to hear about the Micor in your car...any holes for the repeater back there? My original carpet doesn't have the holes in it, so I'm going with Bernie's route. :)

I.ve got a few extra holes back there I don't what their for. When I get it out of storage I will take some pics and post them. Maybe someone can tell me what their for. Doug

[litsnsirn]

I do not know specifically about FHP, but some people bolted the PAC/RT's to the top cover of the Micor, as long as the bolts are short enough, there is no problem. I suppose that they could have even Velcro'd it to the top.

A 2135 key fits just about everything /\/\. There are some rack cabinets that use a different key, I have a whole ring of keys that I take when I go to such a site, but I actually use them scarcely.

[FHP813]

Well since we don't have a confirmed location, I think this is how I'm mounting mine.

[FHP813]

These are the holes in the trunk floor.

[ImEvil1]

Great pic, Bernie. Can I add that one to the resto doc? :)

The velcro idea works for me. My work ride is set up like that. The only problem may be clearance with the carpet (sticking up pretty high).

[FHP813]

Be my guest. :thumbsup: