WANTED: Decibel DB702 White antenna base

[ChrisL]

I need a DB702 in white for my '86 DPS coupe. The car is going to body/paint in the spring, and I can't have this big gaping hole in the 1/4 panel without something to seal it. Please reply here or PM me.

Thanks!

[ChrisL]

TTT!!!

[texunter]

I've got one. And I have the correct whip for it. You would have to work out the wiring though.
Ted

[ChrisL]

Back to the top here, now I just need the cable for a DB702 (will have a fitting on the end that the White DB702 base threads onto).

Anyone, please!?

[ImEvil1]

Should be a regular style NMO mount, no?

[texunter]

Should be a regular style NMO mount, no?

It is..3/4 inch regular nmo.

Ive used the smaller one before but it barely grabs the edges of the hole. = No good.

[ImEvil1]

It is..3/4 inch regular nmo.

Ive used the smaller one before but it barely grabs the edges of the hole. = No good.

That's what I thought....my '83 TX car still has the original mount on it. The lower part of the 702 is the toughest part to find, IMHO.

[ChrisL]

I bought the 3/4" NMO from radio shack, didn't fit. And they didn't have any other styles, so I don't know what I could have done wrong there. The NMO mount was too wide, the threads of the DB702 Base wouldn't fit over it.

[ImEvil1]

That's what I thought....my '83 TX car still has the original mount on it. The lower part of the 702 is the toughest part to find, IMHO.

Maybe you have the wrong base?

Have a pic you can post of it?

[ChrisL]

Maybe, I'll get it tomorrow and post a picture. When you talk about the base, are you talking about the white part, or the die-cast threaded piece under the white part?

[ImEvil1]

The part under the white part.

[ChrisL]

Thanks Mike, I'll check it out. On that note then, does anyone have an extra metal base for a DB702?

[ChrisL]

Finally got everything I need here. Thanks guys!