PDA

View Full Version : CHP stuff on Epay

FHP813
10-07-2010, 09:33 PM
http://cgi.ebay.com/CHP-Mustang-SSP-First-Aid-kit-and-Trunk-Bracket-/110595108183?pt=LH_DefaultDomain_0&hash=item19bffb6d57

http://cgi.ebay.com/CHP-Mustang-SSP-Shotgun-Rack-Complete-/110595096819?pt=LH_DefaultDomain_0&hash=item19bffb40f3

http://cgi.ebay.com/CHP-Mustang-SSP-Deck-Lite-Housing-Assemblys-/110595101848?pt=LH_DefaultDomain_0&hash=item19bffb5498

http://cgi.ebay.com/CHP-Mustang-SSP-Deck-Lite-Housing-Assemblys-/110595104872?pt=LH_DefaultDomain_0&hash=item19bffb6068
28HopUp
10-08-2010, 07:06 PM
Thanks Bernie. I'm bidding on that shotgun rack.
MOstang
10-08-2010, 07:18 PM
Is a member here selling those items?
Va 5.0
10-10-2010, 10:15 AM
I am hoping to win the first aid kit.
28HopUp
10-10-2010, 10:53 AM
I am hoping to win the first aid kit.

Jack, if you don't bid against me, then I won't bid against you! ;) Deal? :)

Good luck!
ImEvil1
10-10-2010, 10:57 AM
Thanks Bernie. I'm bidding on that shotgun rack.

Bill,

Looks like a CV bracket on it (where it goes to the glove box).
ImEvil1
10-10-2010, 10:58 AM
Is a member here selling those items?

No one here that I know of...
28HopUp
10-10-2010, 11:34 AM
Bill,

Looks like a CV bracket on it (where it goes to the glove box).

I figure between this one and the rack I rec'd from Robert, I'll be able to to get it as close to accurate as possible.
ImEvil1
10-10-2010, 11:42 AM
I figure between this one and the rack I rec'd from Robert, I'll be able to to get it as close to accurate as possible.

I'm in the same boat, just wanted to make sure you picked up on it.
FHP813
10-10-2010, 12:00 PM
Bill, speaking of bidding, it looks like DJP is bidding against you.
28HopUp
10-10-2010, 02:21 PM
Bill, speaking of bidding, it looks like DJP is bidding against you.

Well that stinks. I'm sure his pockets are deeper than mine...
Va 5.0
10-10-2010, 02:53 PM
Deal. I will stay away from the shotgun rack. I am only going to bid on the first aid kit when the auction time is running low.:)
ImEvil1
10-10-2010, 04:25 PM
Well that stinks. I'm sure his pockets are deeper than mine...

I'll second that, unless you're wearing cargo pants (and Bernie's right, it's him).
FHP813
10-10-2010, 07:43 PM
Does he have a CHP car?
28HopUp
10-10-2010, 07:56 PM
Well, somebody (not David) wanted that shotgun rack ALOT more than I did -

$565!!!

Wow!!! :eek: Guess I'll just have to make the one I have work in my SSP.
Va 5.0
10-10-2010, 08:42 PM
I lost the first aid kit too. It sold for $102.

$565 for a shotgun rack, WOW!!!!
MOstang
10-10-2010, 08:48 PM
Those are some tough auctions! :eek:
FHP813
10-10-2010, 08:55 PM
Does anyone have the measurements or drawings for these racks. Everything except the lock looks pretty simple to fab. For way cheaper than $500 bucks.
ssp91ssp
10-10-2010, 09:22 PM
Wow!!!!!:eek:
ImEvil1
10-10-2010, 10:36 PM
Does anyone have the measurements or drawings for these racks. Everything except the lock looks pretty simple to fab. For way cheaper than $500 bucks.

Mike C. has one for the '87-up cars. Several of us have them, but the brackets need to be removed and new ones fabbed up for the 4-eyed cars.
ImEvil1
10-10-2010, 10:39 PM
Well, somebody (not David) wanted that shotgun rack ALOT more than I did -

$565!!!

Wow!!! :eek: Guess I'll just have to make the one I have work in my SSP.

The same guy bid on most all of that stuff.
28HopUp
10-11-2010, 09:49 AM
It probably was foolish to bid that high, but I wanted the rack and I figured that the final price would never reach the ridiculous-money I bid on it. That rack is much closer to the one Andy has in CHP #8397, whareas the one I have is the same rack that Rich installed into #8336. I was planning to compare the differences between the two in the hope that I could assemble the right rack for my 4-eye CHP. Plus my experience would have helped others who are looking to restore the CHP Mustang.
Andy
10-11-2010, 01:23 PM
http://www.free-imagehosting.com/out.php/i6395_clacker1.JPG
mac88chp
10-11-2010, 02:28 PM
Nice of that rack seller to include the photo of mine in his ad! From the date, looks like it was shot at this year's Ripon show.

FYI - I no longer own any spare shotgun racks. The last one I had was a complete example for a Rangr equipped Mustang and it recently went for an in-progress '89 restoration out my way (and not for anything close to that eBay price!). I have photos of some of the pieces from it here: http://public.fotki.com/Classicchp/ssp_mustang_technical/page3.html (photos #57-66) and also still have some tracings of these parts in case anyone needs to fab them.
ImEvil1
10-11-2010, 05:07 PM
Mike,

It'd be great to post the dimensions for the dash brackets. The racks and locks aren't hard to find and modify.
NoDrama43
10-11-2010, 05:42 PM
about 15.00 worth of steel and you can make one that is identical to what you need. CHP fabbed them in their shop anyway.