GSP 1238 "Project Slick Top"
 

As some of you already know, I recently sold FHP 1537 and bought GSP 1238 from a member. Bobby (kapracing) was able to determine that 1238 was originally a slick top unit and to date....the only known, confirmed slick top of the aero GSP's.

So, without wasting much time, I carried 1238 to Bobby to begin the transformation back to slick top. He'll be removing the lightbar, filling the lightbar cable hole and repainting the roof. This car has 3 antennas installed on the drivers quarter. 1238 didn't have any antennas on the drivers quarter while in service so Bobby will be filling those holes also and repainting that quarter.

After the Savannah show, my plans are for Bobby to repaint the remaining ultra blue panels and she'll be pretty much complete. A lot of the hard work on the rest of the car like interior/undercarriage/underhood was already done by Russ, the previous owner. I'm just completing the process.

In Service pic of 1238:

Some pics of 1238 (courtesy of Russ) before Project Slick Top" began:

Another:

Nice goin', Brad! That will be sharp once complete. :thumbsup:

Thanks Bill! She's close, just need to nudge her across the finish line! :thumbsup:

On her way back...

Pic two...

Roof hole completely welded up... Slow and steady with no warpage... Now just the small indentions left from the light bar feet being to far inboard... Asides from the hole and very slight indentions mentioned above, the roof is really straight... Next will be moving onto the three holes in quarter panel... More pics. To follow...

Nice work....and it sure will be a pretty interesting car.

:thumbsup:

Thanks guys! :thumbsup:

I came I early this morning so I could be left alone, lol. I got the three holes in the quarter welded up...

Sad to see you welding on top of that beautiful paint! (but I know it's for the right reason). :thumbsup:

It's ok Mike, she will be even more beautiful when she's finished :D

Body work done and in primer...
Found lots of small imperfections in the old paint on the roof so I blocked it down good and put a good coat of primer all over it, now blocking and more blocking.

How's the blue look to you Bobby? Looks very nice in the pics. Anything needed with it?

Mike, I'm going to have the Ultra Blue redone either this winter or next spring. I won't have time before the Savannah show.

Sorry to hear about that, is the color shade still off a bit?

Mike,
With out going into a lot of detail, I'll just say the blue will need redone. It is disappointing, but unfortunately that's what needs to be done to bring this car up to the level it needs to be at. This is a super nice foundation, the undercarriage and interior is amazing and the engine bay needs very little. I hope I can get all of my GSP's in as good of condition (in these areas) as this one is... The car will make Savannah and show well, but just keep in mind, Brad does plan to have the blue redone...

It is good the two of you are putting this kind of detail forth to build upon the nice foundation.

James Eberhart will be proud !!!

Pic2

Niicceeee.

That's looking very sweet! :)

Thanks Mike and Bill! :thumbsup:

Was a great day for the GSP's ...
Perm1235 (states car) got most of its interior back in...
Perm1238 (Brads project slick top) got painted...
Perm2217 (mine) got new refinished wheels installed...

Was a very productive day:2thumbs:

GSP'S
 

What a shop that is with all the beautiful GSP'S

Savannah here we come...

Although you can tell Brads car is not finished, I really like this shot :yes:

I imagine a GSP garage 20 years ago looking a bit like your pictures!

Lol,
Yea Jimmy Crump's garage !!!:cool:

Nice! :thumbsup:

The decals included with the car ( M Squads ) I believe? , were so far off it was pitiful... I got Brad a set copied from scans of a set of originals. Now she really looks the part
:2thumbs:

Nice attention to detail guys!

Brad, I just noticed that Perm #1238 is not in our VIN Project (or the page is lacking information to ID it as #1238). Can you post up some pics or email them to me?

Bobby, could you post a pic of the book maybe??

Yep, no problem. Send me a pic of fan shroud or core support and we can add all of it to the page also! :thumbsup:

1 of 2

2 of 2

Thanks Bobby! ;)