Special Service Mustang.net Forums

Special Service Mustang.net Forums (http://www.specialservicemustang.net/forums/index.php)
-   1982-1986 Special Service Mustangs (http://www.specialservicemustang.net/forums/forumdisplay.php?f=3)
-   -   Installation location for Unitrol # 131 flasher (http://www.specialservicemustang.net/forums/showthread.php?t=2952)

Wolfe1013 10-09-2010 12:14 AM

Installation location for Unitrol # 131 flasher
 
Anyone that can provide me a photo of their Unitrol # 131 headlight wig-wag flasher on an '82 CHP Mustang? I have the flasher, but no instructions.

Thanks,

Greg

Wolfe1013 10-11-2010 08:19 PM

OK, I see you guys looking at this thread. Anybody that can help me?

:headscratch: :)

ImEvil1 10-11-2010 09:03 PM

1 Attachment(s)
I wasn't sure what you were looking for...I have an NOS one with instructions:

Wolfe1013 10-11-2010 09:13 PM

Mike,

I need those instructions and a photo of one installed - the exact location on the car where I need to install it.

Thanks!

Greg

ImEvil1 10-11-2010 09:23 PM

Greg,

Location is top of the left fender well, per the directions above. I do not have a pic of an installed one handy.

If you can blow up the pic above, it's all there. If not, I will scan it and post it when I get a chance.

Wolfe1013 10-11-2010 09:26 PM

Gives me a start to look for the mounting holes. That pic is a little hard to read in places - if you can scan it, that would be great. Just when you get a chance.

Was anything on the inside left shock tower? Too dark to take a pic right now, but I've got holes there facing the motor.

Greg

ImEvil1 10-11-2010 09:32 PM

That's probably it. Check out the pic here: (use your browser setting at 400% and you can see it)

http://www.specialservicemustang.net...ousmustang.htm

Wolfe1013 10-11-2010 09:36 PM

1 Attachment(s)
Aha. Found a pic. Got any idea what went here...if anything?

Wolfe1013 10-11-2010 09:49 PM

THAT'S IT!!!!!!! I just went out an placed mine there and the holes lined up!! I didn't think about going through those photos from the magazines. You're the man!!

Mine was mounted a little high and the hood release cable gets shoved up a bit. There are also several other holes there as I noted in my photo. I'll see if I can mount this flasher tomorrow for a test photo and I'll hook it up later.


Quote:

Originally Posted by ImEvil1 (Post 22156)
That's probably it. Check out the pic here: (use your browser setting at 400% and you can see it)

http://www.specialservicemustang.net...ousmustang.htm


ImEvil1 10-11-2010 09:56 PM

Glad it worked out (and you came to the right place). ;)


All times are GMT -4. The time now is 12:13 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.