A.B.C D and E
 

Wednesday and Thursday this week were good days after spending the day Wed.
out looking for a Micor and a remington replica or something to deface to use in the
SSP I came home empty handed but had a box at the door and in the box was the
original CCI Mic. and cable assembly exhibit A ...I then created a bracket D and E
to hang the New correct CCI Mic. and the then non correct Regency Mic. (better
than nothing)
So at this time i was using the existing holes (2) drilled in the lip just above the top of
the glove box door.these are the holes used to support the shotgun rack and drilled
by the CHP at make ready......but at this time i am just using these holes to create a
HANGER bracket for the two mic.clips! next day thursday I found (here in town) a
similar Micor B a period correct
Motorola Mic B-2. and the shotgun rack! C I have a ordered (today) a correct
Blue Remington 870 that I will have painted and detailed for the car's first show this
Saturday! Admen Mike.......thanks! for all your help and assistance in this project!
your da Man!

http://i17.tinypic.com/67pn76q.jpg

Here is another view!
http://i7.tinypic.com/5xdi7no.jpg

Andy,

Have you actually test fit anything in the rack yet? The lock itself looks a little high, and maybe a little on the wide side (it could just be the pic, angle, etc). CHP angled their racks backward a bit (towards the rear of the car), and I have a feeling it was for clearance.

Your car is definitely coming along.

I'm working on making a diagram/pattern for both styles of shotgun racks...'82-'86, and then '87-'93. Jim Y. are you listening?? ;)

Nothing is bolted in....... the shoe is just on the carpet next to the transmission tunnel
straight up n down Smurf gun will be here this week after final adjustments
it goes to detail ...........to de smurf it!:p
http://www.copsplus.com/products/medium/bt-fs870.jpg
http://www-math.uni-paderborn.de/~pa...tinZ/smurf.gif

It'll be nice (when you get it finished).

Post up the ordering info if you get a chance....I'd like to get one also.

Blue gun arrived today Friday at 1PM Mike i did have to kick out the top a bit to change
the angle but i needed to secure the bottom shoe to the car so it all worked out it's painted
and in the car ready for the show Saturday
http://i10.tinypic.com/4q6vmvb.jpg
http://i8.tinypic.com/4mwge1t.jpg
http://i13.tinypic.com/6hf0k8p.jpg
http://i14.tinypic.com/5zh1maw.jpg

I pulled out some pics of the early interiors, and the racks were definitely angled back, so I figured your setup would have to be adjusted a bit. The shotgun looks good...can you post up the ordering info? I'll probably go the same route.

Is the shotgun loose in the rack? It looked a little wide when I first saw it (the lock). If so, it's probably one for an AR. I have several here for the Remington that you can have, if you need one.

Mike Thank You! I appreciate the offer... the gun does not move any in the rack I finished
late yesterday and i am on my way out the door to go to the cars first show.i will post
more soon..... again thanks!

Andy the car is looking great. The way you painted that shotgun is outstanding. I know I would blow away the first person who would point that painted smurf gun at me. Great work, you are an inspiration for me to finish mine soon.

WOW Thank you!.......yesterday was the car's first car show first time out with paint and decals and it took first place in class.........again Thanks!!:)