1985 SSP carb gasket/heat shield gaskets ?
 

i have the carb and heat shield is there a spacer too or just 2 gaskets ? and where do i find the correct gaskets my local parts store only lists a four hole one for the heat shield there not sure if i need two of the same or if there is 2 different ones any help is appreciated thanks rick r

There is also an EGR spacer below the heat shield. So there should be three gaskets...

carburetor
---gasket---
heat shield
---gasket---
EGR spacer
---gasket---
intake manifold

If I remember correctly the gasket between the heat shield and the EGR spacer was thicker than just a paper type gasket. And the gasket between the EGR spacer and intake manifold has to have a slot (for EGR gasses) in the rear passenger corner in addition to the four Venturi holes.

thanks will have to look into the egr plate