Special Service Mustang.net Forums - 1985 CHP #8337

Special Service Mustang.net Forums (http://www.specialservicemustang.net/forums/index.php)

- Members' SSPs (http://www.specialservicemustang.net/forums/forumdisplay.php?f=17)

- - 1985 CHP #8337 - My First SSP (http://www.specialservicemustang.net/forums/showthread.php?t=3772)

I cant remember 20 years ago when I installed new carpet in the car but I think mine was on the right rear floorboard under the carpet.

I've tried looking, didn't appear to be on the front floor boards, and the seats have make looking under the rear foot wells of the carpet.
New pics up in a while:)

What is this? I know I've seen it talked about on here before. My dads 89 EVOC car has this too in the same spot.
http://i1104.photobucket.com/albums/...7/IMG_3116.jpg

http://i1104.photobucket.com/albums/...7/IMG_3119.jpg

I might have a set of button switches that may be correct.
http://i1104.photobucket.com/albums/...IMG_3120-1.jpg

Only one low beam works...
http://i1104.photobucket.com/albums/...IMG_3138-1.jpg

...but all 4 work with the High beams on.
http://i1104.photobucket.com/albums/...IMG_3140-1.jpg

The ugliest part of the interior. lol
http://i1104.photobucket.com/albums/...IMG_3124-1.jpg

The red cluster lights never get old:)
http://i1104.photobucket.com/albums/...IMG_3143-1.jpg

Quote:

Originally Posted by Mustang Kid (Post 30166)

I've tried looking, didn't appear to be on the front floor boards, and the seats have make looking under the rear foot wells of the carpet hard to do
New pics up in a while:)

EDIT

Quest #1 is complete- Found the build sheet:)

With the help of Bert again, we worked on the carb today. Tuning the carb mixture was becoming a challenge(right sized hex head, and turning while it was bolted into place), so to save time, we took the carb off my 84 GT which ran fine. Plugged everything in and it started right up with one turn of the key:D Casper runs like a champ now(still needs tune up though).

My dad has collected all the correct Equipment for an 80's CHP car. I get to use that stuff on my mustang:D
What goes in the car-
CHP Regency TOUCH M1000 scanner
Complete Radio (forgot the model, but it is the correct one for an 80's CHP)
Federal emergency equip. control box w/ mic.
Whip antenna
Spotlights
Trunk box (I have what is left of one (pic posted in previous post), I will recreate one in my woodshop class)
And package shelf lights and brackets.
(some of the equipment is 85 vintage)

I still need wireing, wig-wag setup, gun rack (may combine an aero SSP CHP rack with one out of a caprice to make a correct 85.), interior equip. brackets, and a trunk equip. shelf.
I'm getting there little by little:thumbsup:
http://i1104.photobucket.com/albums/...7/P1010449.jpg

http://i1104.photobucket.com/albums/...7/P1010448.jpg

http://i1104.photobucket.com/albums/...7/P1010450.jpg

http://i1104.photobucket.com/albums/...7/P1010444.jpg

http://i1104.photobucket.com/albums/...7/P1010445.jpg

http://i1104.photobucket.com/albums/...7/P1010446.jpg

http://i1104.photobucket.com/albums/...7/P1010442.jpg

Notice the #s. CHP scanners had them.
http://i1104.photobucket.com/albums/...7/P1010438.jpg

http://i1104.photobucket.com/albums/...7/P1010439.jpg

Oooooh...let me know if you run across any extra gear for an 85. Still need to collect parts.

And...scan up a pic of the build sheet when you can. Where fdid you find it?

I will let you know if I find any other equipment on eBay or somewhere(that is where my dad finds stuff) Ryan.
I found the Build Sheet under the carpet in the LR foot well area. On top of it I found some paint guide/fix sheet.
Here they are:D
http://i1104.photobucket.com/albums/...7/IMG_3147.jpg

http://i1104.photobucket.com/albums/...7/IMG_3146.jpg

You hit an jackpot! My 89 SSP had nothing for me. :( Keep it up dude!