Quote:
Originally Posted by 03cobra
You can just replace the seatback. Just carefully take your old covers off and replace it on another drivers seat back.Its fairly easy just time consuming. I have taken quite a few seat apart and the official seat lean is just structure failure which causes the back to twist and pops the spot welds. Theres no extra support in the middle of the seat to tie the top and bottom together. There lies the problem. If you need some pictures I have a seat already broken down. Hope this helps. If you need a good back let me know.
|
I took apart the seat today and all the spot welds are intact. No bolt hole rips or any other structural damage, but there is a definite twist to the back. I don't know how to twist it back, and if I did, what would keep it from happening again (taking the thing down to the frame is real PIA). If you have a good driver's side back let me know what you want for it via PM. Thanks,
Bob