View Single Post
  #2  
Old 05-19-2008, 09:11 AM
86NeSSP's Avatar
86NeSSP 86NeSSP is offline
Senior Member
 
Join Date: Nov 2006
Posts: 1,112
Default

Quote:
Originally Posted by litsnsirn View Post
Well, I took the Mustang out to a body shop for the first time on Saturday.

I've never pulled the drive train on a Mustang before, what is it like? I'm a little more used to removing and working on 440's and 383's in full and mid size Mopars. Is it easier to pull the engine and trans together? Then all I need to do is decide what to do about the engine, I'd like to free up a little power while keeping it stock looking. I was thinking of having the exhaust manifolds extrude honed and ceramic coated. I'm pretty sure that my car has about 115k on it, will it be worth tearing into the 302? So far it seems to run better than it has a right to, with 157 HP.

Also, how hard is it to remove the door glass?
Door glass it no real issue. There are some pop rivets in the bottom where is attaches to the risers. Drill and keep it cool.

The engine remove the radiator, pull the shifter, driveshaft, pull hoses, clutch cable, speedometer cable and wiring from engine and body. Un-bolt the exhaust after the engine and then remove the trans cross member and engine mount bolts. Remove the hood for easier pulling. hook it up to the hoist and pull away. You may need to put the car on jack stands in the front so there is enough tilt room for the transmission and then pull it.

If you are wanting more power I would self the original motor and find a good 1985 GT distributor as well as an 87-93 5.0 and toss it in. Install a nice EGR friendly intake a decent carb and re-install all the emissions equipment and you should pick up a few HP. This way if you ever want or have the need to sell the car ALL ORIGINAL you have everything still there and you can give it all to the next owner. Me I would leave it as original as can be since it already is and just know that it is a V8 with as much HP as a 2008 Honda Civic.

It's your car and do with it as you will. The newer 5.0 will get you to the 200+hp range just by doing the small items I told you about.

I have in fact a reman 85 GT distributor (NEW minus pigtail) that I am selling to clear out all my stuff.
__________________
2007 Mustang GT
Fun loving 1988 5.0 Ranger!
1964 Fairlane 500 2 door post (GR350)
Reply With Quote