|
1987-1993 Special Service Mustangs The aero cars. |
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Nevermind I thought you had dull stainless tips. Best bet is to go to Dynomax and get the tips they have on the pipes after the muffler.
|
#22
|
||||
|
||||
tips 150 at 50 resto brand new
|
#23
|
||||
|
||||
__________________
Michael J nicknamed as "MJ" ---------------------------------------------------- Owned 6 Fox Mustangs since 1998. Proud owner of the vehicles: 1989 Ocala FL SSP unmarked drug enforcement unit 1989 Mustang GT (5 speed conversion) 1990 FHP unit - SOLD 1991 Davie, FL SSP #142 - SOLD 2014 VW Jetta SportWagen TDI |
#24
|
||||
|
||||
This has been one of the hardest things to find... OEM style original tailpipes. You would think with the popularity of these cars that they would still make them. I found the aluminized OEM style but no original polished stainless.. Oh well will most likely go with the 2.25 Dynomax...
|
#25
|
||||
|
||||
Well FMR may be able to get me as close to the original exhaust as I have been able to find.. Polished stainless steel tailpipes and all... About $560... Not really too bad. I will be replacing the intermediate, mufflers and tail pipes as well as all of the isolators... Should help look better then the 2.50 Pypes system that is currently on it... I am going to have it all welded like was suggested by you guys...
Thanks... |
#26
|
||||
|
||||
Dynomax / Walker on the AL car, plan for the same on my KHP car. I should have welded it too.
__________________
-Aaron 1992 SSP Kansas Highway Patrol #264 Troop H 1991 SSP Georgia State Patrol Perm/Trunk #1195, Roof/Badge/Tag #813 |
#27
|
|||
|
|||
arron ?
Did the Walker mufflers have the exhaust pipe and flange attached ??
Can you give me the part numbers. I understand the original exhaust is 2 1/4is that what you ordered. I am just about ( next day or two) to order 2 mufflers and both tail pipes from Summit Racing. If you can give me the exact part numbers that would be great.. Hard to keep them all straight, so many listings.. Thanks Bard |
#28
|
||||
|
||||
Yes the originals are 2.25 inch... The Walker part numbers are tail pipes - 45059/left and 45060/right.. Intermediate pipes - 42796 and 42835. mufflers 22349 and 22440. You can get the tailpipes non polished alluminized. I have to get new isolators/hangers also. I am going to have the system welded into place after I put it on. I was also told these mufflers come with the heat shields... We shall see about that. The car currently has a 2.50 inch PYPES system and it fit horribly on the car.. I didn't put it on the car it it was the previous owner who put it on..
By the way (Aron) the exhaust looks great on your car! |
#29
|
||||
|
||||
Thanks for posting those part numbers up here.
__________________
Mike 1992 Michigan State Police SSP Mustang #5114 1993 Wisconsin State Patrol SSP Mustang 1993 Missouri State Highway Patrol SSP Mustang P641 http://members.fotki.com/MOstang/ |
#30
|
|||
|
|||
Still looking
I called Walker-DynoMax today they have no listings at all for the 2.25 stainless tailipes 45059 (L)or 45060(R). They say they do not sell the tailpipes indiviually, only as a Kit. I explained that some sites offer them, he said theymust have broken up a kit and be selling pieces?? I called S. R. and one other place they have stainless tailpipe 45060 ( Pass Side) in stock as do several other places list prices from 117.08 Canadian to high of 174.00 USD. They are all out of stock of the 45059 ( dr side) & have "No availbility". Dynomax offers a complete exhaust system.. cat back but not in 2.25 only 2.50 & 3.00. I ordered everything from SR( Walker ) : 2 mufflers (22349-LH & 22348-RH). Tailpipes 45903-LH & 45902-RH, 2 extension pipes 42796-LH & 42795-RH. Total including a few hangers etc was 339.24 for both sides-cat back. They are not the stainless tips.. Ill guess I will have to get my sandpaper & polishing kit out.
|
|
|