|
1982-1986 Special Service Mustangs The 4-eyed cars. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1985 SSP carb gasket/heat shield gaskets ?
i have the carb and heat shield is there a spacer too or just 2 gaskets ? and where do i find the correct gaskets my local parts store only lists a four hole one for the heat shield there not sure if i need two of the same or if there is 2 different ones any help is appreciated thanks rick r
|
#2
|
|||
|
|||
There is also an EGR spacer below the heat shield. So there should be three gaskets...
carburetor ---gasket--- heat shield ---gasket--- EGR spacer ---gasket--- intake manifold If I remember correctly the gasket between the heat shield and the EGR spacer was thicker than just a paper type gasket. And the gasket between the EGR spacer and intake manifold has to have a slot (for EGR gasses) in the rear passenger corner in addition to the four Venturi holes. |
#3
|
|||
|
|||
thanks will have to look into the egr plate
|
|
|