|
Special Service Mustangs/Parts Wanted Cars and Parts wanted here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
NOS (or mint) 87-90 fender extensions
I am looking for some NOS LX fender extensions ( lower bumper fillers) for1987-1990 both sides. AND... Same for 1991-1993...
I will consider a used near mint set or individual ones. " My idea of a near mint is one that still wears factory paint, No cracks, light scratches or light rock chips will be acceptable but clear pics plz." I just purchased a NOS 91-93 RT side from eBay for 49.95 shipped but I am in need of several sets of 87-89's and would like to have a extra set of each.
__________________
Gathering; Collecting & Documenting GSP History... 1983 GSP#3083 Capt. C. Stallings #99 Post 41 1988 GSP#8292 Trpr R. Wilcox #799 Post 27; ACE wrecked in service with 24k miles; most documented & lowest mileage GSP 1990 GSP#0196 Trpr P. Kirkpatrick #756 Post 29 1992 GSP#2221 Trpr M. Prince #895 Post 9; “1 of 6” LoJack GSP Mustangs |
#2
|
||||
|
||||
Quote:
__________________
Jim for the first time since 1998 there is only two left: 1984 Oregon SP unmarked 1986 Idaho SP |
#3
|
||||
|
||||
Thanks Ken! AKA "E435300_SMPV"
I still need another set of 87-90's and a drivers side 91-93... Thanks, Bobby
__________________
Gathering; Collecting & Documenting GSP History... 1983 GSP#3083 Capt. C. Stallings #99 Post 41 1988 GSP#8292 Trpr R. Wilcox #799 Post 27; ACE wrecked in service with 24k miles; most documented & lowest mileage GSP 1990 GSP#0196 Trpr P. Kirkpatrick #756 Post 29 1992 GSP#2221 Trpr M. Prince #895 Post 9; “1 of 6” LoJack GSP Mustangs |
#4
|
||||
|
||||
I need to bump Bobby's thread. The guy who sold Ryan the PCSD car had 20" wheels on it, and he cut the fender extensions to gain clearance. So I need one for each side before Bobby repaints the car.
__________________
Bill Jr. To everyone out there, wherever you are. Remember, the light at the end of the tunnel may be the police chasing you down in their own Mustang! |
#5
|
||||
|
||||
Bill check with American Muscle. It's my understanding they have the reproduced from Ford tooling 91-93's (which I'll be ordering a D.S. for my 92). They may have the 87-90's as well???
__________________
Gathering; Collecting & Documenting GSP History... 1983 GSP#3083 Capt. C. Stallings #99 Post 41 1988 GSP#8292 Trpr R. Wilcox #799 Post 27; ACE wrecked in service with 24k miles; most documented & lowest mileage GSP 1990 GSP#0196 Trpr P. Kirkpatrick #756 Post 29 1992 GSP#2221 Trpr M. Prince #895 Post 9; “1 of 6” LoJack GSP Mustangs |
#6
|
||||
|
||||
Still looking for a pair for my 88 PCSD car...
__________________
Bill Jr. To everyone out there, wherever you are. Remember, the light at the end of the tunnel may be the police chasing you down in their own Mustang! |
#7
|
||||
|
||||
Here's an example of the cruddy ones to be found on ebay -
http://www.ebay.com/itm/1987-1990-Mu...5VeuOs&vxp=mtr There ARE some nicers ones for sale, but they are relatively expensive. 'Guess I will have to "pony up" to buy a nicer pair.
__________________
Bill Jr. To everyone out there, wherever you are. Remember, the light at the end of the tunnel may be the police chasing you down in their own Mustang! |
#8
|
||||
|
||||
I found a pair on ebay that should work. They should arrive here next week, and I will forward them to Bobby along with a few other items that I have here already (plus some emblems I need to order).
__________________
Bill Jr. To everyone out there, wherever you are. Remember, the light at the end of the tunnel may be the police chasing you down in their own Mustang! |
#9
|
||||
|
||||
Quote:
I received the two fender extensions and will get them to Bobby for painting. |
#10
|
||||
|
||||
Yes - it was a shame the car had 20s on it - but - so glad it's being put back to OEM spec.
Bill - did you find inner fender liners/wells for the PCSD yet? I know those were missing as well (likely due to the wheels).
__________________
Ryan |
|
|