Installation location for Unitrol # 131 flasher
 

Anyone that can provide me a photo of their Unitrol # 131 headlight wig-wag flasher on an '82 CHP Mustang? I have the flasher, but no instructions.

Thanks,

Greg

OK, I see you guys looking at this thread. Anybody that can help me?

:headscratch: :)

I wasn't sure what you were looking for...I have an NOS one with instructions:

Mike,

I need those instructions and a photo of one installed - the exact location on the car where I need to install it.

Thanks!

Greg

Greg,

Location is top of the left fender well, per the directions above. I do not have a pic of an installed one handy.

If you can blow up the pic above, it's all there. If not, I will scan it and post it when I get a chance.

Gives me a start to look for the mounting holes. That pic is a little hard to read in places - if you can scan it, that would be great. Just when you get a chance.

Was anything on the inside left shock tower? Too dark to take a pic right now, but I've got holes there facing the motor.

Greg

That's probably it. Check out the pic here: (use your browser setting at 400% and you can see it)

http://www.specialservicemustang.net...ousmustang.htm

Aha. Found a pic. Got any idea what went here...if anything?

THAT'S IT!!!!!!! I just went out an placed mine there and the holes lined up!! I didn't think about going through those photos from the magazines. You're the man!!

Mine was mounted a little high and the hood release cable gets shoved up a bit. There are also several other holes there as I noted in my photo. I'll see if I can mount this flasher tomorrow for a test photo and I'll hook it up later.

Glad it worked out (and you came to the right place). ;)

well duh....that's how we roll here at NET. ;)

Sorry for the crude drawing..."Unitrol goes here" heh heh heh

:woohoo:

I have those "duh moments" more and more as I get older. LOL

I applaud your skills with the "paint" program...that was a fast edit! :bouncy:

Seriously, though, glad to help 'cause that's what we're here for.

um...that is NOT skill. LOL

I do wish I knew what the other holes were for. I'll keep researching.

:thumbsup:

Some of those look like factory holes...my '82 is out in storage, but a few match up with the '93 in my garage.

How about this for a better photo of the Unitrol installed? :)

Nice!

Looks real good. :thumbsup:

:thumbsup:You will make Ron M very proud !!!!

She's not wired up yet, so after snapping those pics, I pulled it back off. Maybe after the tune up she's been waiting for, I'll look into the wiring problems I'm having and then look at wiring this up.

If I could get a scan/better photo of those installation instructions, that would be much appreciated.

Mike,

I just found this. If you get the chance to scan this install sheet, I'd appreciate
it; tried blowing it up and couldn't read it clearly. Sorry- nothing like 50+ year old bifocaled eyes...

Thanks muchly!!

Mark "dieselheart"

Mark,

Here are a few (better) pics:

.

..

Thanks for those pics, Mike.