![]() |
SCHP Photos
I'm seeking any interior/equipment photos for '87 - '93 South Carolina Mustangs. I know they used a "Kustom" radar unit and I have been able to obtain one. I need to see the placement/brackets for it.
Also if anyone has verifiable info as to what radio/s were used and the associated placement/brackets, that would be most helpful. I've got the exterior paint/markings nailed down, now I need the interior equipment details. Many thanks. |
1 Attachment(s)
Gregg,
I'm thinking that the brackets seen in this car were just screwed down to the top of the flat part of the dash. The switchbox looks like it was also mounted to a bracket. I'll look through some more footage and see if I can get a good shot of the radio (and placement). |
Thanks Mike. I have wrestled with that photo and it's like I keep wanting to turn on a light in a dimly lit room. You know what you want is there but you just can't quite see enough detail. :confused: Thanks for posting it up, I'll keep going over it.
|
1 Attachment(s)
Here's the picture with the lighting adjusted, does this help? You can see the type of radar control box, switch box and Motorola radio from the lightened photo. They may have ran the siren off the Motorola radio since these radios were capable of that.
|
looks like a code three switch box possibly. like the ones in the later texas cars?
|
gregg, when i get back I can check for holes in my 93. it is untouched since it came out of service and still has the radar bracket mounted in it. I will let you know what i find.
|
Quote:
Eric, What radio do you see there? (help me out) :) |
2 Attachment(s)
Quote:
|
In my department we velcro down the radar units to the dash. This one could be with velcro?
|
Quote:
I'm not sure...but it definitely looks like something is there. |
Many thanks everyone! :dancingbanana: Mike, I did get the switch box that you told me about. Now it looks like I'll be on the hunt for the "Spectra". Does anyone know the identity/model/number or other desiganation of that unit? Jim has a handle on the brackets so we are about to corner this beast.:thumbsup:
Again thanks everyone for the help, keep it rolling if you come up with any more equipment details. |
1 Attachment(s)
Gregg,
Here is a better shot of the radar brackets. :) |
Thanks Mike. It appears they didn't mind sacrificing the dash pad for functionality.:takenotes:
|
That radio control head is either an X9000 syntor head or a spectra A9 control head. Could have been either radio for that time period. I'm not sure which one they used. I will check with some people I know with motorola here since we are on the state line and Greenville SC is the adjoining county.
|
Ok, according to the SCHP radio shop in Blythwood SC. they used the low band (42meg) syntor x9000 during that time and also towards the end of that era they transitioned to 800 meg trunking system and used the spectras with the A7 head and some cars had both radios in them. The control head in the picture is definitly not an A7 head. Hope this helps.
|
Quote:
|
1 Attachment(s)
Gregg,
Here is the proper bracket and configuration. In my 93 they had the swith box or radio head mounted under the radar bracket. You can also see the holes in the side of the console for the siren etc. |
1 Attachment(s)
pic of the bracket out of the car.
|
Thanks Jim! The pictures give good detail to work with. :woohoo: I can see now how the mounting works with the two small braces supporting the bracket out in front of the dash. It was driving me crazy before thinking the main bracket bolted directly to the dash but there just wasen't enough clearance for the radar unit itself.
This configuration will do nicely and with the outboard short support bracket longer than the other the unit will have a slight canter toward the driver.:thumbsup: |
| All times are GMT -4. The time now is 08:26 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.