|
|||||||
| Special Service Mustang Tech Any and all technical questions for SSP cars. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Thought that I got away from leaky door seals when I sold the convertible.
__________________
Toshi '93 SSP '90 LX 'vert - Sold '87 LX hatch (parted out) '88 LX 'vert (should have never) '83 GL hatch (college car, long gone) |
|
#2
|
||||
|
||||
|
You may have to bend the door a little to increase the contact area. Fox body Mustangs are not known for their good door fit. Just open the door and use your knee on the inside rear portion of the door to brace it as you "gently" tug on the upper portion of the door. Just give a little tug and then check the door fit. You may have to do this several times to get the right fit. Since the door half of the hinge is welded on there is no way to adjust the door inward other than minor bending. Just be careful. Doug
__________________
1986 CHP 3705 -- 1989 Minnesota State Patrol |
|
#3
|
||||
|
||||
|
The seals around the windows the 90 degree seals, shrink and crack from the sun over time.
|
|
#4
|
|||
|
|||
|
Just a side note when trying to find a water leak. At a dealership I worked for we would set a hose on the car and let it run, well it didn't always work. We fabbed up a shower head to simulate a rain shower to give it a more real world approach to finding leaks.
|
|
#5
|
||||
|
||||
|
Interesting...
__________________
Toshi '93 SSP '90 LX 'vert - Sold '87 LX hatch (parted out) '88 LX 'vert (should have never) '83 GL hatch (college car, long gone) |
|
#6
|
||||
|
||||
|
While judging Mustangs at our Mustang Memories car show this past Sunday, I found a Fox Mustang that had perfect door seals. They did not kink like mine at the top, rear, 90 degree bend. I'm very dissappointed about these brand new door seals I bought from Latemodel Restoration Supply. It's the kink that's causing all the problem.
__________________
Toshi '93 SSP '90 LX 'vert - Sold '87 LX hatch (parted out) '88 LX 'vert (should have never) '83 GL hatch (college car, long gone) |
|
#7
|
||||
|
||||
|
I try to buy most of my replacement parts from my local Ford dealership. Many parts are still available and the quality is never a concern.
__________________
Jim for the first time since 1998 there is only two left: 1984 Oregon SP unmarked 1986 Idaho SP |
|
#8
|
||||
|
||||
|
It's not these that are leaking. It's the seal between the door and body. Brand new. They kink at the top rear 90 degree corner. But I did talk to someone at this past Sundays Mustang Memories car show about where to get good ones that don't do that. I saw his and we got into conversation. Some place in Ohio sells good ones that don't kink. He found them on eBay. That is where I'm going to look for replacements of my brand new ones from Latemodel Restoration Supply.
__________________
Toshi '93 SSP '90 LX 'vert - Sold '87 LX hatch (parted out) '88 LX 'vert (should have never) '83 GL hatch (college car, long gone) |
![]() |
|
|