|
|
|||||||
| Special Service Mustang Tech Any and all technical questions for SSP cars. |
|
|
Thread Tools | Display Modes |
|
#2
03-07-2009, 10:48 AM
|
||||
|
||||
Remove the trim "Kick" panels (under the dash) on both sides. There will be a small harness on each side with a round white plastic sheathe tucked or secured by tape to the structure. Reach inside the access hole area behind the courtesy switch to find it. Then the fun begins, trying to align the harness end with three small pins to the connector of the switch itself with three small recipticals .
It's not complicated but just tight quarters and you can't see the back of the switch, so it has to be accomplished by feel. That should do it, good luck.
__________________
Gregg '89 FHP Unit # 435 (Deceased) '89 FHP Unit # 1526 Troop H (Madison)SOLD 12/3/13 '89 SCHP Marked Unit # 2-12-80 SOLD 6/21/15 '88 SCHP Unmarked Unit # 2-12-23 SOLD 9/3/12 '90 MSHP Marked Unit # P-162 Plate # 642-HP SOLD 12/17/11 '88 MSHP Marked Unit # P-162 Plate # 642 
|
|
|
Threaded Mode